• 3D-Druck, 3D printing, Pulver, powder, Laser

    3D-utskriftstillämpningar på olika fält

Industriell 3D-utskrift revolutionerar tillverkningen - kontakta oss idag

Additiv tillverkning med plaster eller metaller är idag ett reellt begrepp. På senare år har ett stort antal innovativa 3D-utskriftstillämpningar utvecklats som har förändrat produktionsprocesserna i hela branscher. Allt fler företag får upp ögonen för denna framtidsorienterade teknologi, och det av goda skäl: industriell 3D-utskrift har en enorm potential för leveranskedjor och produktutveckling, och banar väg för nya typer av affärsmodeller. Ett växande utbud av material, samt möjligheten till större produktionsvolymer, banar väg för nya produkter.  Och tack vare den tillförlitliga kvaliteten kan 3D-utskrivna delar användas även i branscher som flyg, fordon och sjukvård.

Ta en titt på de imponerande 3D-utskriftstillämpningarna för olika branscher på vår internationella webbplats.

Alla 3D-utskriftstillämpningar: hitta din framgångsrapport

Conflux Heatexchanger | © EOS

Innovation Story Conflux Technology | 3D Printed Heat Exchanger

Produktion och energi

Conflux Technology has patented a highly efficient, compact heat exchanger design that derives its performance from a geometry that can only be made using additive manufacturing (AM). 

Kuhnstoff Wittmann Gripper | © EOS

Innovation Story Wittmann Group & KuhnStoff | Bronchial Gripper With Functional Base Plate

Produktion och energi

Tangible success: Build a lightweight grip system with integrated functionality capable of moving the required loads over a minimum of 5 million operating cycles

Innovation Story Raytech & Hoet | Additive Manufacturing for Eyeware

Produktion och energi

With 3D printing on additive manufacturing machines Hoet is able to produce eyeglass frames with complex designs and on demand at the same time. This shortens the time-to-market and reduces storage costs.

Innovation Story Siemens | 3D Printing for High Performance Industrial Gas Turbines

Produktion och energi

Innovation for maintenance of high performance industrial gas turbines. Siemens industrial turbomachinery counts on EOS 3D printing technology and customized services.

Innovation Story Anubis 3D | 3D Printed End-of-Arm for Smarter Packaging

Produktion och energi

An innovative, industrial, 3D printed end-of-arm enables Langen Group to lighten the load on their customer’s robotic packaging line.

Innovation Story APS Technology | 3D Printed Oilfield Drilling Equipment

Produktion och energi

Drill bit and rotary steerable system (RSS): Complex parts for rotary steerable systems, which actively steer oil and gas wells, are now being produced by APS Technology, Inc. using industrial 3D printing technology from EOS.

Innovation Story ASS Maschinenbau | Polyamide Robotic Hand

Produktion och energi

Manufacture of a lightweight robotic hand with integrated air channels from polyamide using the EOSINT P 396.

Innovation Story Conformal Cooling with Additive Manufacturing

Produktion och energi

Accelerate production and reduce maintenance: Innomia uses EOS metal 3D printer for optimizing manufacturing process for automotive components.

Innovation Story Euro-K GmbH | 3D Printed Micro-Burners

Produktion och energi

Develop and build a multi-fuel burner capable of using gaseous and liquid fuels with additive manufacturing on the EOS M 290.

Innovation Story  Festo AG | Solutions for a More Economic Small Batch Production

Produktion och energi

Fast and economic small batch production of complex components using a FORMIGA P 100 supplied by EOS. Production of a bionic gripper that can reliably pick up and safely put down objects gently and flexibly.

Innovation Story Vectoflow GmbH | 3D Printed Flow Measurement Probe

Produktion och energi

Extremely rigid and durable: this compact flow measurement probe was made in one piece using industrial 3D printing.

Circuit Board | © Photo by Alexandre Debiève on Unsplash

Innovation Story Beta LAYOUT | Multi-Dimensional Circuit Carriers Using Additive Manufacturing

Produktion och energi

Whether for individual developers or large established companies, additive manufacturing ensures that custom-made circuit carriers can be used for the prototypes of new electronic devices.

Innovation Story SSI Schäfer | 3D Printed Extraction Gripper

Produktion och energi

Individual special gripper from PA 2200 leads to reduction of set-up time and increase of production time while achieving a wheight reduction by more than 70 %

Innovation Story trinckle & Kuhn-Stoff | Solving the Challenges of Custom Design

Produktion och energi

Design time reduced from over 8 hours to just 10 minutes: trinckle and Kuhn-Stoff partnered together to solve the problem of automating efficient development and design processes.

3D printed Medical Nasal Swabs for Covid-19 test kits

Innovation Story 3D Printing Studios | Production of Nasal Swabs for COVID-19 Test Kits

Hälsa och sjukvård

Additively manufactured medical nasal swabs for COVID-19 test kits with EOS 2200 Polyamide 12 polymer material on an EOS P 396 system

Innovation Story University of Michigan | Developing Biocompatible Materials for Implants

Hälsa och sjukvård

The University of Michigan uses a FORMIGA P 100 to produce individualized and lifesaving implants for children. Together with EOS they develop new biocompatibe materials. 

Innovation Story Alphaform | Cranial Implants Produced With Additive Manufacturing

Hälsa och sjukvård

Development and manufacture of a precision-fit implant for the cranial area with particular permeability for liquids and heat dissipation.

Innovation Story FHC | Stereotactic Platforms for Neurosurgery

Hälsa och sjukvård

Small-batch production of precision surgical components using a FORMIGA P 100.

Innovation Story DePuy Spine | EOS Technology Speeds Prototyping at DePuy Spine

Hälsa och sjukvård

Speedy and flexible manufacturing of complex surgical tool prototypes using an EOSINT M 270.

3D-printed and packaged nasal swabs ready for use in COVID-19 test kits | © Aenium Engineering

Innovation Story AENIUM & Burloak - Certified 3D-Printed Nasal Swabs

Hälsa och sjukvård

Cost-effective and reliable nasal swabs for PCR test kits. Aenium and Burloak developed a model for producing up to 40 000 swabs per day on multiple EOS additive manufacturing systems.

Innovation Story Anatomics | Spinal Fusion Surgery Uses Additive Manufacturing

Hälsa och sjukvård

As demand for patient-specific solutions in spinal fusion surgery grows, the need for a robust, highly accurate and scalable 3D printing technology for manufacturing biocompatible devices is also growing.

Additively manufactured bespoke OsseoFrame from EOS Titanium Ti64 powder material on an EOS M 290 system

Innovation Story OMX Solutions | Bespoke Medical Devices for Craniomaxillofacial Surgery

Hälsa och sjukvård

Custom medical implants that are both efficient and cost-effective for the patient. Additively manufactured bespoke OsseoFrame are  an accurate solution for dental prosthetic rehabilitation.

Canto Dive Light | © EOS

Innovation Story Canto & Thor | Additive Manufacturing Technology for the Perfect Dive Light


Using additive manufacturing Canto produces a robust dive light with functional integration. A particularly stable and at the same time lighter weight dive light was the result. 

Innovation Story Hansgrohe | 3D Printed Dog Shower


Rapid and cost-efficient production of a series production-ready, drinking water-approved shower head for dogs, made from just a few components, offering quality, design, and convenience functions that will impress dogs and their owners alike.

Innovation Story BRAGi | 3D Printing of Custom-Made Glasses Frames


The Chinese company Nanjing BRAGi Optical Technology Co, Ltd. offers customized eyewear throughout Asia.

Innovation Story Formula Student | Producing Topology-Optimized Steering Stub Axle


In the construction the student engineers employed for the first time an additive manufacturing (AM) process and the car went on to win the title.

Innovation Story DHBW Engineering Stuttgart | 3D Printed Cooling System for Race Car


Additive manufacturing systems EOS P 396 produces race car component with 3D printing technology and lightweight fine polyamide PA 2200.

Innovation Story Spartacus3D | Metal 3D Printing with Titanium


Additive manufacturing gave complete creative freedom to the DS design team, as well as very fast and easy implementation and production. 

Innovation Story GreenTeam Uni Stuttgart | Additive Manufacturing for the Formula Student


Design of a flow optimized, oil resistant and flameproof distribution unit for the cooling system of an electric racing car.

© Photo by Daniel Abadia on Unsplash

Innovation Story Hasenauer & Hesser | Custom-Made Spare Parts for ICE Trains


Small-series production with 3D printing: Additive manufacturing of thin-walled fluorescent tube fixtures for the onboard information displays of ICE trains with EOS Systems

Daimler Buses Ersatzteile, EOS, 3D Druck, Pulver, Kunststoff

Innovation Story EvoBus GmbH | Additive Manufacturing Is a Core Element of Sustainable Spare Parts Management


Comprehensive consulting to help efficiently enter the world of additive manufacturing and establish a sustainable spare parts management system

Innovation Story ArianeGroup | 3D Printing for Ariane 6 Propulsion Module


Thanks to EOS technology, ArianeGroup has succeeded in taking this to a whole new level: Instead of 248 elements, the injector head of a rocket engine of a future upper stage propulsion module now counts just one component.


Innovation Story Liebherr | 3D Printed Primary Flight Control Hydraulic Component


First metal 3D printed primary flight control hydraulic component flies on an Airbus A380. World premiere in civil aviation with EOS technology.

Airbus A350 Airplane | © EOS

Innovation Story Sogeti | Additive Manufacturing for the New A350 XWB


Experts from Sogeti High Tech succeeded in developing a cable mount on the front spar of the vertical stabilizer for the passenger aircraft in record time with EOS technology and expertise.

Innovation Story RUAG | Additive Manufacturing of Satellite Components


Antenna bracket for RUAG's Sentinel satellite - certified for deployment in outer space.

MTU borescope eye | © EOS

Innovation Story MTU | MTU Relies on Additive Manufacturing for Its Series Component Production


EOS Technology enables the cost-effective manufacture of engine components for the Airbus A320neo.

Innovation Story Airbus Defence and Space | Parts for Satellites


Cost-effective production of retaining brackets for the connection of components in telecommunication satellites thanks to additive manufacturing.